標準設備型號表顯示的是在純蒸汽壓力為3bar,工業蒸汽為6bar的情況下的設備生產能力，單位是公斤/小時。如果要獲得某種型號設備的實際生產能力，則必須根據實際工作壓力，在標定生產能力上乘上一個轉換系數。

   Production capacity：

     Standard equipment model table shows the production capacity of equipment in the case of pure steam pressure for 3bar, industrial steam for 6bar, unit is kg / h. If you want to obtain the actual production capacity of a certain type of equipment, it must be based on the actual working pressure, in the calibration of the production capacity of a conversion factor.

  型 號 選 擇 舉 例：

     ● 工業蒸汽壓力: 7bar

     ● 所需純蒸汽壓力：2bar

     ● 純蒸汽最高需求量：500公斤/小時

     ● 轉換系數：1.7

     ● 標定輸出需求：500/1.7=294公斤/小時

     ● 選擇型號：PSG300DTS

  Model selection example：

     ● Industrial steam pressure：7bar

     ● pure steam pressure needed：2bar

     ● The highest demand of pure steam：500kg/h

     ● Conversion coefficient:1.7

     ● Specified output needs:500/1.7=294kg/h

     ● Model selected:PSG 300 DTS

  公 用 工 程 需求;

     ● 不含雜質和腐蝕性物質的工業飽和蒸汽；最大壓力為9bar

     ● 講料子要求為去離子水，無硅石，碌，胺，揮發性物質等等，壓力要求為1-2bar

     ● 供電標準：根據客戶要求。

     ● 干燥，無油，干凈的壓縮空氣，最小壓力要求為6bar。

   public work demand：

     ● Industrial saturated steam without impurities and corrosive materials,the maximun pressure is 9 bar

     ● The water for injection is required to be the deionized water without sillica,chlorine,amine and volatile substance,etc.The pressure required is 1-2bar

     ● Power supply standards:according to the clients'requirements。

     ● Dry,oil-free and clean compressed air,the minimum pressure required is 6 bar

     技 術 參 數： Technical parameters of Clean Steam Generator

     工業蒸汽進氣工作壓為：0.3MPa,純蒸汽工作壓力：0.15-0.2MPa
     Intel pressure of industrial steam is 0.3MPa and the purse steam working pressure is 0.2Mpa

    更多技術細節>>